KIT CONTENT

1.       Two lamps

2.       Two ballasts

3.       Accessories: Installation  metal plate 2 pieces ,Screw 5 pieces Screw

4.       Installation Instruction Manual, warrantee card.

General
Operating Temperature :-40oto 105 °C
Steady State Light Output： 3000±200 lumens typical ,bulb type dependant
Turn on Light Output:  >70%at 2 secs,>85% at 3 secs
Expected Ballast Life:: >3500 hrs
Radiated EMI Susceptibility: S95/54/EC
Radiated EMI Emissions: S 95/54/EC
Cooling : Air Cooled
Maximum Cable Cable Length: 500mm
Output Wave Form:240±25 Hz square wave
Steady State Output Power:35W±2W
Open Lamp Circuit Protection: Latch off after 1 second
Shot Circuit Protection : Latch off after 1 second
Maximum Output Current: 8 A initial lamps on, 3A next 2 secs
Maximum Output Power:80W±17W
Steady State Output Volts:85V±17V
Striking voltage: 23000V
Flickering: No flickering: during steady status

Inside with rubber ,all waterproof and shockproof

Electrical Input
Steady State Input Voltage: 9~16 V
Max in Rush Current: 15 A @ 50ms ,8 A at 2secs
                 Decreasing to Steady state within 30 secs
Max Steady State Input Power: 45W (9 to 16V)
Input Turn On:8 V and above 
Input Turn Off: Below 7 V 
Reverse Voltage Protection: No damage to ballast with -40V
Conducted EMI Susceptibility: S95/54/EC 
Conducted EMI Emission: S95/54/EC 
Weight: 0.41 kg
Efficiency: Over 90% during steady status